Skystream is a wind generator designed to be installed on top of a tower to convert the kinetic energy in the wind into electricity to be used in a home's existing electrical system. Cut-in wind speed is about 8MPH and an average wind speed of 10MPH or greater is required for effective power production.

In a typical residential application, a home is served simultaneously by the Skystream and a local utility. If the wind speeds are below "cut-in speed" (8 mph) there will be no output from the generator and all of the needed power is purchased from the utility. As wind speeds increase, the Skystream's output increases and the amount of power purchased from the utility is proportionately decreased. When the Skystream produces more power than the house needs, the meter spins backwards creating a "credit" that can be used later. All of this is done automatically without any interaction by the homeowner. Batteries are not required with Skystream. This wind generator model is not for 'off-grid' systems but is designed to produce power that is combined with your utility power only.

In some areas a premium is paid for excess power produced and not used in the building. Check at www.dsireusa.org for incentives in your area inside the USA.

Rated Capacity: 2.4 kW
Rotor: 12 feet / 3.72 meters; 50–325 RPM
Alternator: Slotless permanent magnet brushless
Grid Feeding: 120/240 VAC Split 1 Ph, 60 Hz (Check with us for other configurations)
Estimated Energy Production: 400 KWh per month at
12.3 MPH (5.5 m/s)
Weight: 170 pounds
Tower: Towers from 35-70 feet are available; height is
dependent by site
Technical Specifications: Skystream 3.7 Spec Sheet (PDF)